login

login

Poly Vinyl Creations Poly Vinyl Creations
Fence Den

SureClose Mounts


SureClose 57 - Center Mount
  • ADA Compliant
  • Adjustable closing speed
  • Visibly small footprint
  • Highly tamper resistant
  • Maintenance free - No messy grease
  • Self-closes gates up to 180lbs.
SureClose 57 is a concealed hydraulic gate closer. It is speed adjustable using the enclosed adjustment tool and designed to never leak hydraulic fluid. Extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. A real workhorse tested to 500,000 open/close cyles and a 1,500lb. (680kg) point load.
 
SureClose 57SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.

NOTE: When used on swimming pool gates, always consult local authorities for swimming pool codes.

SureClose 57 - Flush Mount
  • ADA Compliant
  • Adjustable closing speed
  • Visibly small footprint
  • Highly tamper resistant
  • Maintenance free - No messy grease
  • Self-closes gates up to 180lbs
SureClose 57 is a concealed hydraulic gate closer. It is speed adjustable using the enclosed adjustment tool and designed to never leak hydraulic fluid. Extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. A real workhorse tested to 500,000 open/close cyles and a 1,500lb. (680kg) point load.
 
SureClose 57SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.
 
NOTE: When used on swimming pool gates, always consult local authorities for swimming pool codes.

SureClose 108 - Center Mount
  • ADA Compliant
  • Final snap action
  • Adjustable closing speed
  • Visibly small footprint
  • Highly tamper resistant
  • Maintenance free - No messy grease
  • Self-closes gates up to 260lbs.
SureClose 108 is a concealed hydraulic gate closer. It features Final Snap Action (FSA) which increases speed at the end of closing to overcome electric or coded locks. Both closing speed and FSA are adjustable using the enclosed adjustment tool.
Designed to never leak hydraulic fluid, the SureClose 108 is extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. Tested to 500,000 open/close cyles and a 1,500lb. (680kg) point load.
 
SureClose 108SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.
 
NOTE: When used on swimming pool gates, always consult local authorities for swimming pool codes.

SureClose 108 - Flush Mount
 
  • ADA Compliant
  • Final snap action
  • Adjustable closing speed
  • Visibly small footprint
  • Highly tamper resistant
  • Maintenance free - No messy grease
  • Self-closes gates up to 260lbs.
SureClose 108 is a concealed hydraulic gate closer. It features Final Snap Action (FSA) which increases speed at the end of closing to overcome electric or coded locks. Both closing speed and FSA are adjustable using the enclosed adjustment tool.
Designed to never leak hydraulic fluid, the SureClose 108 is extremely safe and does not offer resistance if closed quickly in an emergency. Soft, quiet closure also protects the latching/locking system. Tested to 500,000 open/close cyles and a 1,500lb. (680kg) point load.
 
SureClose 108SF is suitable for pool and safety gates. SF models open to and self-close from 90°.* NO hold-open feature.
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.
 
NOTE: When used on swimming pool gates, always consult local authorities for swimming pool codes.

SureClose SM Hinge - Center Mount
  • Effortless alignment & adjustment
  • Withstands heavy loads
  • Visibly small footprint
  • Pre-threaded mounting brackets
  • Maintenance free - No messy grease
  • 1,500 lb point load capacity
The SureClose SM hinge was designed for large access control, double drive, estate and heavy commercial and residential gates that don’t self-close, with a point load up to 1,500lb. (680kg.). The SM model features extra large hinge pins and dual thrust bearings designed for high loads. Save money when SM is used as the bottom load bearing hinge along with a SureClose 57 or SureClose 108 closer.
 
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.
SureClose SM Hinge - Flush Mount
  • Effortless alignment & adjustment
  • Withstands heavy loads
  • Visibly small footprint
  • Pre-threaded mounting brackets
  • Maintenance free - No messy grease
  • 1,500 lb point load capacity
The SureClose SM hinge was designed for large access control, double drive, estate and heavy commercial and residential gates that don’t self-close, with a point load up to 1,500lb. (680kg.). The SM model features extra large hinge pins and dual thrust bearings designed for high loads. Save money when SM is used as the bottom load bearing hinge along with a SureClose 57 or SureClose 108 closer.
 
All SureClose hinges and closers come packaged with the gate mounting bracket included. Post mounting brackets sold separately.
 
Aluminum gate mounting brackets: Pre-drill using 3/16" (5mm) drill bit and use #14 countersunk through-bolts or fasteners. See post brackets for their fastener requirements.
SureClose Center Mount Post Mounting Brackets

7511 - Bracket Type: 6026-01
  • Aluminum Mounting Bracket
  • Horizontally Adjustable
  • Minimum post size 2 ½” x 2 ½” (64x64mm) required.
  • Predrill using 1/4" (6mm) drill bit and use #18 countersunk through bolts or fasteners. 
7512 - Bracket Type: 6026-02
  • Aluminum Mounting Bracket
  • Horizontally Adjustable
  • Minimum post size 2 ½” x 2 ½” (64x64mm) required.
  • Predrill using 3/16" (5mm) drill bit and use #14 countersunk through bolts or fasteners. 
 
7513 - Bracket Type: 6026-03
  • Aluminum Mounting Bracket
  • Horizontally Adjustable
  • Minimum post size 4"x4" (100x100mm) required.
  • Predrill using 3/16 (5mm) drill bit and use #14 countersunk through bolts or fasteners. 
 
7514 - Bracket Type: 6026-04
  • Aluminum + Clamp Mounting Bracket.
  • Added fixing clamp prevents slippage.
  • Minimum post size 2 ½” x 2 ½” (64x64mm) required.
  • Predrill using 3/16" (5mm) drill bit and use #14 countersunk through bolts or fasteners. 
 
7526 - Bracket Type: 0510-05
  • Steel Mounting Bracket
  • Horizontally Adjustable
  • Steel, weldable post bracket must be finished.
  • Protect threads and moving parts when powder coating or painting.
  • Minimum post size 2 ½” x 2 ½” (64x64mm) required.

SureClose Flush Mount Post Mounting Brackets
 
7515 - Bracket Type: 6026-05
  • Aluminum Mounting Bracket
  • Minimum post size 2"x2" (50x50mm) required. 
  • Predrill using 1/4" (6mm) drill bit and use #14 countersunk through bolts or fasteners.

7525 - Bracket Type: 0510-04
  • Steel Mounting Bracket
  • Steel, weldable post bracket must be finished.
  • Protect threads and moving parts when powder coating or painting.
  • Minimum post size 2" x 2" (50x50mm) required.

Options

Multiple styles to suit any project

Features

Easy to install